Round Cooling Tower Archives - UNITED HEAT EXCHANGER

Jun 28
0
Round Cooling Tower Manufacturers

Round Cooling Tower

By | Cooling Tower | No Comments
Round Cooling Tower

Round Shaped Cooling Tower

Rounded cooling towers or Round Shaped Cooling Tower, the material balance around a wet, evaporative cooling tower system is governed by the operational variables of makeup the volume of fluid which passes through a given surface per unit time, a type of vaporization of a liquid that only occurs on the surface of a liquid and windage losses, draw-off rate, and the concentration cycles.When the property of a solid, liquid, or gaseous chemical substance called solute to dissolve in a solid, liquid, or gaseous solvent to form a homogeneous solution of the solute in the solvent, of these minerals have been exceeded they can precipitate out as mineral solids and cause fouling and heat exchange problems in the cooling tower or the piece of equipment built for efficient heat transfer from one medium to another.

Round shape cooling tower or Round Cooling Tower is the circulating water flow that is removed (usually discharged to a drain) in order to maintain the amount of Total Dissolved Solids,other impurities at an acceptably low level. Higher TDS concentration in solution may result from greater cooling tower efficiency. However the higher the TDS concentration.The water that must be added to the circulating water system in order to compensate for water losses such as evaporation, drift loss, blow-out, blow-down, etc.

The temperatures of the recirculating water, piping and heat exchange surfaces determine if and where minerals will precipitate from the recirculating water. Often a professional water treatment consultant will evaluate the makeup water and the operating conditions of the cooling tower and recommend an appropriate range for the cycles of concentration. The use of water treatment chemicals, pretreatment such as water softening, The evaporated water leaves its dissolved salts behind in the bulk of the water which has not been evaporated, thus raising the salt concentration in the circulating cooling water.

Round Cooling Tower

Jun 28
0

Water Cooling Tower

By | Cooling Tower | No Comments

Water Cooling Tower – Cooling Water Systems are an essential part of process operations for many industries and public buildings. There are four problems commonly associated with water systems; corrosion, scale, fouling and microbiological contamination.

Clearwater products have been specifically designed to optimise system performance, cleanliness and heat exchange efficiency. Clearwater is the acknowledged leader in stable halogen treatment technology.

Regulatory requirements (ACOP L8) specify that cooling towers need to be controlled in order to prevent the proliferation of legionella bacteria. Legionnaires disease has become a major health and safety issue. Clearwater have the knowledge and experience to ensure that our clients comply with Government legislation

Water Cooling Tower

Jun 28
0

Natural Draft Cooling Tower

By | Cooling Tower | No Comments

“Natural Draft Cooling Tower” Natural contacts ambient air rising up through the tower either by forced draft using large fans in the tower. Natural draft is utilizes a tall chimney. Warm, moist air naturally rises due to the density differential compared to the dry, cooler outside air. Warm moist air is less dense than drier air at the same pressure.

This moist air buoyancy produces an upwards, current of air through the tower.Natural that appears like a natural draft setup, though airflow is assisted by a fan.This association is misleading, as the same kind of cooling towers are often used at large coal-fired power plants as well. Conversely, not all nuclear power plants have cooling towers, and some instead cool their heat exchangers with lake, river or ocean water.

The heat required to evaporate the water is derived from the water itself, which cools the water back to the original basin water temperature and the water is then ready to recirculate. Natural cooling towers have become the design standard for all natural-draft cooling towers because of their structural strength and minimum usage of material. The hyperboloid shape also aids in accelerating the upward convective air flow, improving cooling efficiency. These designs are popularly associated with nuclear power plants. That contact causes a small amount of the water to be lost as windage (W) and some of the water to evaporate.

Natural Draft Cooling Tower

Side Widget Area

Click here to assign widgets to this area.