counter flow cooling tower Archives - UNITED HEAT EXCHANGER

Counter Flow Cooling Tower Manufacturers

Counter Flow Cooling Tower

By | Cooling Tower | No Comments
Counter Flow Cooling Tower Manufacturer

Counter Flow Cooling Towers

Counter Flow Cooling Tower

  • The air flow is directly opposite to the water flow in counterflow.
  • Gravity distributes the water through the nozzles uniformly across the fill material.
  • Advantages of the counterflow design is Spray water distribution makes the tower more freeze-resistant.
  • Disadvantages of the counterflow design is basically higher initial and long-term cost, and Difficult to use variable water flow, as spray characteristics may be negatively affected.
Frp Cooling Tower Manufacturers

Frp Cooling Towers

By | Cooling Tower | No Comments

Frp Cooling Towers

FRP Cooling Towers Manufacturer

FRP Cooling Tower

frp multi cell square cooling tower manufacturer

frp multi cell square cooling towers

FRP Cooling Towers Manufacturer INDIA

FRP cooling towers are very economically operating Cooling Tower, Since there is no fan or electric motor, there is no huge operating or maintenance cost involved in this Cooling Tower and also in Energy efficiency point of view, this is the best Payback Cooling Tower when comparing with other models.


FRP Bottle Type Cooling Tower Manufacturer

FRP Bottle Type Cooling Towers


  • Simply says, in Fan less Cooling Towers the Hot water will be sprayed in the top of the Cooling Tower with spray nozzles into small droplets like mists and the droplets are crossed with the atmospheric wind flow to get the water cooled.
frp cross flow cooling tower Manufacturer

frp cross flow cooling towers

Applications :

This model Cooling Towers are water saving and pollution free, safety with environmental protection

  • Method / Type : Sound free design.
  • Fanless / Natural Draft : Since no fan, motor and gear box it is low noise Cooling Tower than any other low noise type Cooling Tower.
  • Fan Motor Type : Since fan, motor and gear boxes are used, high noise and vibration.
FRP Cooling Tower Suppliers

FRP Cooling Tower India

Advantages :

  • FRP cooling towers of other model cooling towers are due to Fan, Motor, Gear box and Drive shaft and its vibrations. Since these models of Cooling Towers are not having Fan, motor, Gear boxes, this equipment has no trouble-some of noise & vibration.